Demo summary:
Thomas: https://docs.google.com/document/d/1hANFjE_c5HBmdin2yNjr-IbBORlwuc_h_UspED8lIo8/edit?usp=sharing
Alex: https://docs.google.com/document/d/1h5Oadd0YwYQn5MLVesUEHDLiEaEdUS0mR0mzLMZWxdQ/edit?usp=sharing
Choti:https://docs.google.com/document/d/1b8Jt495zuheMSYbRJHtQuBtY8L6XWRelBmW4BgWrfxA/edit?usp=sharing
Thomas + Alejandro Tutorial
First you must collect an led light, a resistor of 220, and an alligator. You put the short side of the led into the slot that says gnd, and the longer one connected to the alligator. The other side of the alligator connects to the resistor, and the opposite side of the resistor goes into the 10th slot. After you are done with this, you go to your code and change led-built in to 10 so it knows to go to the 10th slot. You then just select how fast you would like the light to blink, and you are good to go.
Multiple blinking led v. 1:
Multiple blinking led v. 2:
Explanation:
Christmas Tree:
Alex Tutorial
you will need a 220 resister, an led light, and and alligator clip. first connect the register to port 10, then clip the aligator clip on the open end of the resister. then clip the other side of the aligator clip to one end of the led light. and with the open end of the led light put into the ground port. now upload the code.
Thomas: https://docs.google.com/document/d/1hANFjE_c5HBmdin2yNjr-IbBORlwuc_h_UspED8lIo8/edit?usp=sharing
Alex: https://docs.google.com/document/d/1h5Oadd0YwYQn5MLVesUEHDLiEaEdUS0mR0mzLMZWxdQ/edit?usp=sharing
Choti:https://docs.google.com/document/d/1b8Jt495zuheMSYbRJHtQuBtY8L6XWRelBmW4BgWrfxA/edit?usp=sharing
Thomas + Alejandro Tutorial
First you must collect an led light, a resistor of 220, and an alligator. You put the short side of the led into the slot that says gnd, and the longer one connected to the alligator. The other side of the alligator connects to the resistor, and the opposite side of the resistor goes into the 10th slot. After you are done with this, you go to your code and change led-built in to 10 so it knows to go to the 10th slot. You then just select how fast you would like the light to blink, and you are good to go.
Alex Tutorial
you will need a 220 resister, an led light, and and alligator clip. first connect the register to port 10, then clip the aligator clip on the open end of the resister. then clip the other side of the aligator clip to one end of the led light. and with the open end of the led light put into the ground port. now upload the code.
Comments
Post a Comment